Updating m33 Only free live web sex chat guy and boys

Now people with a phat PSP can play homebrew on their PSP!!

Hope this helped someone, if you have any problems, just comment here or send a PM =D ill put some images up of the installation of both 5.00 M33-6 and the 1.50 installer, when i have time =Dnice work man seems the psp documentation is being greatly upgreaded since the lot of new guides posted recently.

now while still in the VSH Menu, go to 'USB DEVICE' and press left or right on the PSP until you get to 'UMD Disc' now press select to exit the VSH Menu, and go to settings and then USB Connection plug your PSP into your computer and the folder that usually comes up is your mem stick, if it does, press o on your psp tehn enter usb connection again.

when you enter usb again, there should be 1 folder in there called 'UMD 9660' ( correct me if im wrong ) now copy and paste that to your desktop or somewhere you will remember it.

when its done, rename it to the game ( so for crisis core, name it final fantasy VII crisis core or something along those lines... go back to 'USB DEVICE' and press left or right until its on 'Memory Stick' now press select again to exit the VSH Menu, navigate back to usb and that is your Memory stick.

if there isnt a folder called 'ISO' create 1, but make sure it is 'ISO' ( without the ' s ) now put the game that you jsut ripped into that folder.

by law, ive almost been caught 1ce from it, im not doing it again.... now that 5.00 M33-4 is out, I'd like to update from 5.00 M33-3. now that 5.00 M33-4 is out, I'd like to update from 5.00 M33-3. I have just done this to my psp GUIDE: How to Custom Firmware PSP-1000's and PSP-2000's Oon PSPHACKS forumn. At the end it said i needed a firmware update and a link was to this forumn and page.

The whole process is much simpler than I thought it would be. Do I have to run the 1.5 kernel addon again if I ran it when I updated to 5.00 M33-3? The whole process is much simpler than I thought it would be. Do I have to run the 1.5 kernel addon again if I ran it when I updated to 5.00 M33-3? you dont need to do the addon if you had installed it on 5.00 M33-3, but updating the cfw from 5.00 M33-x to 5.00 M33-4 is the same way as this guide, just without the 5.00 ofw, anything below 5.00 M33 ( eg. I did exactly as shown and no problems till got this far.

no, you dont need to go from 4.01 M33-2 or lower to get 5.00 M33-3 simply because that the ofw eboot has all the previous files in it and the CFW eboot has all the previous changes in it aswell.... You DO NOT need to update to 3.71 M33-4 or 4.01 M33-2 ( or some other ) and then this, you only need to update to this. If you would rather use a PSP with a Wi Fi connection, you can use the guide by Aguilz, which can be found here: You Will Need: • A Computer that you can browse files that are on a memory stick • An Internet Connection ( duh ) • win RAR or something that works like it... If you don't have a custom firmwared PSP, go here: ( that link will also show you how to unbrick your PSP.... So if your Phat PSP ( PSP-1000 ) is on 3.52 M33-4, you can update straight to this firmware.now exit USB mode again, go to game and memory stick. and you dont need an emulator to play UMD rips, because when we changed the 'UMD ISO MODE' in the VSH Menu to Sony NP9660, that lets us play more game rips ( about 98% of them ) without a UMD drive in.the M33 Driver does the same thing, but the other 2, you need a UMD Disc in there to play rips off your mem stick. and im not allowed to give outg any links to downlaod roms....

Leave a Reply